ZD22 Transmitter

The ZD22 detects oxygen using a zirconium dioxide (ZD) sensor that is not susceptible to ambient conditions or sensor poisons. The long-life sensors make the ZD22 an economical solution for detecting oxygen in measurement ranges such as 0 to 1,000 ppm or 0 to 96 % by volume. Its automatic temperature compensation and the linearization of the measurement signals ensure high measurement accuracy.

Functional safety and device protection
The hardware of the ZD22 complies with the European Functional Safety Standard DIN EN 61508-2: 2011 (SIL). The housing is protected against the ingress of dust and water (protection class: IP54). An optional weatherproof housing can provide additional protection.

Communication and service
Signals are transmitted using either the analog industrial standard (0.2-1 mA or 4-20 mA) or the digital RS-485 interface (Modbus protocol). The ZD22 uses two status LEDs to indicate its operating status. The optional RC22 remote control facilitates service and adjustments on site (one-person adjustment). Test gas for function tests can be inserted via a calibration adapter.

Key features at a glance:

General information:

• Measuring principle: zirconium dioxide (ZD)
• For oxygen
• Expected sensor lifetime: 4-5 years
• Signal transmission: 0.2-1 mA / 4-20 mA / RS-485
• Protection class: IP54

Approvals / Certifications:

• SIL 2/3 (hardware)

Optionally available:

• RC22 remote control, weatherproof housing, calibration adapter